网赌最正规的平台-世界最大的赌博app-登录

?
Taiwan Tel:+886-2-2603-2999Shenzhen Tel:+86-755-2803-5670

TaiWan SAN JU International Electrical Machinery CO.,LTD.Shenzhen Sanju Electric Machinery Co.,LTD.Sanju Technology and electrical machinery CO.,LTD.

Discussion on the crucial performance and quality of medical cooling fans

Back to list Release date: Aug 17, 2018

Now with the continuous development of medical equipment, the domestic medical level is also gradually increasing.however, if the medical machinery fails suddenly during normal operation, it is likely to cause injury to the treatment personnel, so the parts in the medical equipment are especially important. The following is about the importance and function of the " TaiWan SAN JU International Electrical Machinery CO.,LTD. cooling fan in medical equipment.

Perhaps everyone is not fully aware of the medical cooling fan.lets take a look at an example to further understand:

Send it to the equipment department for maintenance.the power-on experiment works normally and keeps the compressor working.about 1h later, the above-mentioned failure phenomenon occurred again.open the case for inspection and find that the compressor motor ring is open.when the motor coil drops to a safe temperature, the over-temperature protection device turns on the circuit.in order to make the compressor work for a long time without over-temperature, a cooling fan is installed inside the equipment.the inspection found that the cooling fan can rotate, but the cooling effect is poor at a very slow speed.after working for a period of time, the temperature rise of the compressor motor exceeds the requirements for safe use. The test machine works normally after replacing fans of the same specification.

 medical cooling fan

From the above example of equipment failure, it is very important to ensure that the temperature rise inside the equipment does not exceed the safe use range during use, otherwise the equipment will not work normally, causing huge losses. Therefore, the cooling fan occupies a very important position in that medical machine.a good medical cooling fan can directly affect the normal operation of the whole machine.

Established in 1988, TaiWan SAN JU International Electrical Machinery CO.,LTD. have been dedicated to cooling fan research and development, manufacturing, and sales of AC, DC, and EC series axial flow cooling fans in the past 30 years. Serve many successful enterprises both at home and abroad, and export agents are distributed in many countries in the world. Welcome customers to call us for consultation.Taiwan telephone number: + 886-2-25427722 , Shenzhen consulting hotline:0755-2803-5670


?
Close
阿里巴巴 International
阿里巴巴 flagship store

WeChat

Hotline
+86-755-2803-5670
Service
top

网赌最正规的平台|世界最大的赌博app

XML 地图 | Sitemap 地图